during lesson two i started to build the face picture up. we started to make sure all the lines of the face were correct. during this point i had to make quite a few alterations to the lines i originally made, as there were quite a few triangles on the face. these have to be alimented as they will cause problems when building the face into a 3d format.
in the final part of the lesson i had to build two planes and add the pictures to them. so i selected the plane tool, added the picture by using the materials button or m on the keyboard. i then had to adjust the pictures, so uv transform button was selected under the modifications section. i then adjusted the size of the picture and using the gizmo button i could then move the picture (the front profile picture) so it was facing the front. i then had to make another plane and attach it to the side of the other, the gizmo was then selected and the picture was moved into the middle of the plane. (it was also necessary to adjust the size of the picture)
lesson three;i started to build up the lines in 3d max. this was done by making sure the "magnet" button was switched on, as well as choosing corner to corner on the line tab. this took quite a long time as i had to make sure there were no triangles in the 3d part.
No comments:
Post a Comment