the bar

the first thing to do was to create the bar area. this was done by creating a number of boxes and the attaching the required material to them.

it is possible to see that here, the wood material has been altered to the wood taken from the above website. the bar stools were made using the chamfer circle tool, this was then used on all three of the circular parts of the stools.

the glass bottle were also added to the scene. a tutorial was used as support and guidance as to how to make the bottles.

the first thing to do was to create a line picture of half the bottle, using the fillet tool to create the curves on the bottle. the lathe tool was then used to create the rest of the bottle. a green material was then applied, with the bottle label on top. in the material editor, once the material was applied to the bottle, it was important to untick the tile button in the u and v sections (under coordinates). finally, i had to use the uv map modifer tool to adjust the lable to the right size.


the final thing to make the bottles look complete, was to add a piece of wood for them to sit in upside down in.

finally, a shelf was created using various sized boxed to hold the glasses. tumblers, wine glasses and bear glasses were made. this was done by drawing half the glasses using the line tool. the lathe tool was then to finish the rest of the glass. finally a glass material was added to the glasses. they were then cloned and placed on the shelves.